Nokia C1 00 - Nokia battery authentication guidelines

background image

Battery and charger information
This device is intended for use with a BL-5C rechargeable battery. Nokia may make additional battery models available for this

device. Always use original Nokia batteries.

This device is intended for use when supplied with power from the following chargers:AC-3. The exact charger model number

may vary depending on the type of plug. The plug variant is identified by one of the following: E, X, AR, U, A, C, K, or B.

The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times

are noticeably shorter than normal, you need to replace the battery.

Product and safety information 11

background image

Taking care of your device
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will

help you protect your warranty coverage.

Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode

electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing

it.

Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices, damage

batteries, and warp or melt certain plastics. When the device warms to its normal temperature from a cold temperature,

moisture can form inside the device and damage electronic circuit boards.

Do not attempt to open the device other than as instructed in this guide.

Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Only use a soft, clean, dry cloth

to clean the surface of the device.

Do not paint the device. Paint can clog the moving parts and prevent proper operation.

Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could

damage the device and may violate regulations governing radio devices.